Home

The well-known aviator Trond Hammerstad employed in Kitemill

- The position in Kitemill is spot-on for me. This is what I have been working on ever since the boy days, says the famous model airplane builder Trond Hammerstad. He joined Kitemill 1st of May, 2020.

Trond Hammerstad - hovudbilete.jpg

Experienced model builder: Here is Trond Hammerstad with two F-86 Sabers on a 1: 3.7 scale. He made the aircraft on order from customers in the United States. Now Trond has become part of Kitemill's permanent team.

Trond Hammerstad is now working hard to assemble a new kit model, Spark kite. It has a wingspan of 7.5 meters. Hammerstad has long experience as a model aircraft builder. The 52 year old has more than 40 years of experience in the turbine section of the model airplane sports. Over the years, he has built up a large network both nationally and internationally. In total, he has made hundreds of RC (Radio Control) jets, received several international awards and accolades and a lot of international media coverage.

Turned the hobby into livelihood

Trond Hammerstad is a well-known and respected person in both the Norwegian and international turbine model section. For the past five years, he has been a full-time model builder and has delivered over 40 models around the world, from his company Exact Aircraft, from his model workshop in Skien. (Exactaircraft.com).

Trond Hammerstad is the only one in Norway who has been able to make aviation model building a profession. He has a large workshop next to his residence in Skien and has supplied various jet models to customers all over the world.

Trond Hammerstad - støttebilete.jpg

Starfighter for customer in Germany: Here is Trond Hammerstad (right) with a prototype of an F-104 Starfighter, on a scale of 1: 3. He made the model for a customer in Germany. To the left, Vidar assists Hognestad.

Skien and Lista

-I knew Kitemill and Jo Grini. That led me to do some assignments for Kitemill. Gradually, there have been many. When I got the offer of a permanent job with production of kites, in Kitemill, I applied right away, says Trond.

- Kitemill is an exciting company that is absolutely operating in my field, so I am very happy to be part of the Kitemill team from now on. I leave my company idle while I work for Kitemill, ”says Hammerstad, who already has been at Kitemill’s test facility at Lista for two weeks. He will also spend some of his working hours in the workshop he has built up in Skien.

25 December 2020 09:30

Successfully passed 125 flights in 2020

After Kitemill's kite number 5 in the KM1 series "Spark 5" completed its first flight in mid-December, the company has completed over 125 flights over Lista in 2020. Kite number 4 in the KM1 series...

28 November 2020 21:21

LIDAR campaign at Lista

In mid-November 2020, PhD student Jan Markus Diezel started measuring the speed of the wind over Lista Airport based on LIDAR measurements. LIDAR is basically the same technology that self-driving ...

23 October 2020 16:02

- Kitemill is truly sector leading

The highly respected Airborne Wind Energy (AWE) expert David Ainsworth is now a senior advisor for Kitemill. The company general manager, Thomas Hårklau, is very pleased that David Ainsworth now is...

18 September 2020 14:34

The KM1 Spark kite automatic launch and landing

A strong focus of engineering of a more robust kite system pays off with great results in our August 2020 test campaings.

15 September 2020 16:10

New QHSE manager with long management experience from Avinor

Otto de Besche is Kitemill's new quality manager, with responsibility for the company's quality, health, environment and safety. He has over 40 years of experience from the air traffic service, Avi...

11 August 2020 09:22

The IEA focuses on airborne wind in large energy workshop

The International Energy Agency (IEA) is now putting a sharp focus on airborne wind energy in a large conference that will be held digitally on 23. and 24. September 2020. On the landing page of th...